How do I know if I need a roof repair or full replacement?

We inspect the roof and give you an honest assessment. Minor leaks, cracked tiles, or small membrane punctures are usually repairable. If the decking is compromised, the membrane has widespread failures, or the roof is past its service life, replacement is the better investment.

What types of roofs do you work on?

We work on flat roofs (TPO and modified bitumen), tile roofs (clay and concrete), composition shingle roofs, and foam roofing systems common in the Palm Springs area.

How long does a roof replacement take?

Most residential roof replacements are completed in 1–3 days. Larger homes or complex roof designs may take longer. We provide a timeline and written scope before work starts.

Do you handle roofing permits?

Yes. We pull all required permits through the local jurisdiction and ensure the work passes inspection. This is included in your project scope — no surprises.

(951) 292-0703

Licensed & Insured Lic #1148568

(951) 292-0703 omdandevelopment@gmail.com

Roof Repair & Replacement in Palm Springs & the Coachella Valley

Flat roofs • Tile roofs • Leak repair • TPO membrane — honest scope, clean installs, and permits handled.

Based in Palm Springs, we complete roofing projects across surrounding Southern California communities.

Get a Free Quote Call (951) 292-0703

Insured & bonded • Financing available

Roofing done right in a climate that demands it

Desert heat accelerates roof wear. We inspect first, give you an honest assessment, then repair or replace with materials rated for extreme UV and temperature cycling in the Coachella Valley.

• Flat and pitched roofs — repair and replacement
• Permits pulled and inspections passed
• Leak diagnosis before any work starts
• Clean job site — no debris left behind

Pairing roofing with insulation or Cool Life Paint?

We handle insulation, cool-roof coatings, HVAC, and windows — bundle the work and save on mobilization.

See all services →

Roofing Service Areas

We provide roofing repair and replacement services across Palm Springs and surrounding Southern California communities.

Desert Hot Springs Indio Cathedral City Menifee Moreno Valley Murrieta Palm Desert Palm Springs San Bernardino Temecula Twentynine Palms Yucaipa Yucca Valley

Get a Free Quote

Roofing Services We Offer

From leak repair to full re-roof — we cover it.

Flat Roof (TPO / Modified Bitumen)

Clean membrane installs with proper drainage slope, seam welding, and perimeter flashing. Common for desert homes with low-pitch roofs.

Tile Roof

Clay and concrete tile repair and replacement. We source matching tile and re-set cracked or slipped tiles with correct mortar and underlayment.

Composition Shingle

Architectural shingle installs for pitched roofs. We use high-temp underlayment rated for desert climate conditions.

Roof Repair & Leak Fix

Leak diagnosis, flashing repair, and spot fixes before small issues become expensive structural problems.

Roof Inspection

Pre-purchase and post-storm inspections with photos and a written report — useful for insurance claims and real estate transactions.

Gutters & Drainage

Gutter installation or rerouting coordinated alongside re-roofing so drainage is right from day one.

Did You Know?

What most homeowners don't know about roofing in the desert.

170°F

A dark flat roof surface can reach this temperature on a standard Palm Springs summer afternoon — accelerating membrane breakdown and shortening roof life by years.

90%+

of solar radiation is absorbed by a dark roof. A light-colored or reflective surface absorbs only 20–30%. The color of your roof directly affects your attic temperature.

20 yrs

is the average national roof lifespan — but desert UV and thermal cycling means roofs in the Coachella Valley often age faster than that estimate suggests.

Flat roofs are the most common residential roof style in Palm Springs — and the most misunderstood. Proper drainage design is the single most critical factor in flat roof longevity.

How a Good Roof Protects Your Investment

A roof failure doesn't just mean roof repair. It means water intrusion, drywall damage, mold risk, electrical hazards, and structural problems. The cost of maintaining a roof properly is a fraction of the cost of what happens when you don't.

→Early repair beats late replacement. A small leak caught during an inspection can be patched for very little. That same leak left unaddressed will compromise decking, insulation, and interior finishes — turning a minor repair into a major project.
→Roof color affects cooling bills. A lighter or reflective roof surface absorbs dramatically less heat than a dark one. Your attic stays cooler, your AC works less, your bills drop.
→Permits protect your resale. Un-permitted roof work can create problems when you sell — buyers' inspections and lenders flag it. We pull permits when required so your investment is protected.
→Bundling saves on mobilization. Combining roofing with insulation, Cool Life coating, or gutter work in one project reduces the overhead on each individual trade.
→Insurance may cover storm damage. We document roof damage with photos and written scope. This documentation is often required for insurance claims and saves you from having to redo the process.

Signs you need a roof inspection now

You see daylight from the attic

Any visible light coming through roof decking means there is an opening. Water follows the same path light does.

Water stains on ceilings

Stains are evidence of past or ongoing leaks. The stain is often not directly below the entry point — water travels before dripping.

Bubbling or blistering membrane

On flat roofs, surface bubbling means the membrane has separated from the substrate. This is a failure mode, not a cosmetic issue.

It's been more than 3–5 years since inspection

Desert UV degrades materials faster than most roofing warranties assume. Annual or bi-annual inspections are worth it in this climate.

Common Questions About Roofing

Straight answers to what homeowners ask most.

What is TPO roofing and why is it common in Palm Springs?

TPO (Thermoplastic Polyolefin) is a single-ply membrane applied to flat and low-slope roofs. It is heat-welded at the seams, which creates a waterproof bond stronger than adhesive-based systems. It is also naturally white or light-colored, which makes it reflective — ideal for a desert climate. It is currently the most widely used commercial and residential flat roofing material in the US, and it performs well in the UV-heavy environment of the Coachella Valley.

How does desert heat affect roofing materials differently than other climates?

In the Coachella Valley, roofs experience extreme UV exposure and severe thermal cycling — surfaces heat to 170°F in the afternoon and cool significantly at night. This daily expansion and contraction stresses materials, causes adhesives to fail, dries out flashings, and cracks tiles faster than in moderate climates. Products rated for hot climates matter. Warranties assuming "average" conditions may not accurately reflect real-world service life here.

My flat roof has a low spot where water ponds after rain — is that a problem?

Yes — ponding water (standing more than 48 hours after rain) is a problem even in a low-rainfall desert. Water weight stresses the structure, algae and debris accumulate, and standing water accelerates membrane degradation. The fix is usually a tapered insulation system or a drain relocation — not just patching the surface. We assess the drainage pattern and recommend the right solution, not just a temporary fix.

Can I walk on my flat roof to inspect it myself?

It depends on the membrane type. TPO and modified bitumen can handle careful foot traffic. Foam roofing (SPF) is more vulnerable to puncture and should only be walked on with soft-soled shoes and care. Gravel-ballasted roofs need the gravel kept in place. If you're not sure, don't — one accidental puncture can negate the value of whatever you went up to look at. We inspect professionally and document with photos.

What is flashing and why does it fail?

Flashing is the metal or membrane material used at transitions — where the roof meets a wall, chimney, vent, or skylight. It is the most common source of roof leaks because it is the most vulnerable to thermal movement, caulk cracking, and improper installation. In the desert, metal flashing expands and contracts significantly with temperature swings, which works existing caulk loose over time. Flashing inspection and re-sealing is part of every project we do.

Should I fix my roof before selling my home?

Almost always yes. Roof issues are among the top items flagged during home inspections and are frequently used by buyers to negotiate price reductions or request credits that exceed the actual repair cost. A roof in known good condition with documentation gives buyers confidence and removes a negotiating point. We can provide a written assessment and scope that you can share with buyers or their inspectors.

What is the difference between a roof repair and a roof restoration?

A repair targets a specific failure point — a cracked tile, a failed seam, or a puncture. A restoration is a full-surface treatment: cleaning, addressing all minor defects, and applying a new protective coating over the existing membrane to extend its life without full tear-off. Restoration is a good option when the membrane structure is still sound but the surface has aged. We recommend it when the underlying system has years of life left and full replacement would be premature.

Get a Free Quote

Tell us what you're planning and we'll reach out fast.